SL600AC SLIDING GATE OPERATOR
20
11. Troubleshooting
Trouble Possible
causes Solutions
The door fails to
open and close.
LED display
does not light.
1. Power is OFF
2. Fuse burn
1. Make sure that
power is ON.
2. Replace fuse.
The door can
open fails to
close.
1. Infrared beam is
obstructed.
2. Infrared sensor
function is enabling, but
the sensor has not been
installed.
1. Remove
obstructions.
2. Make sure the
infrared sensor
function is disabling.
Remote
transmitter does
not work.
1. Battery level may be
low
2. Transmitter code is
lost
1. Replace the
battery inside the
transmitter.
2. Reprogram the
transmitter.
The transmitter
operating
distance is too
short.
Battery level may be
low.
Replace battery.
SL600AC SLIDING GATE OPERATOR
21
11. Packing list
After receiving the gate operator, you should make an
unpack-inspection, in which you should check whether the product
was damaged. If you have any problem please contact our dealer.
You should find the following items in our standard packing:
No. Item Quantity
1
SL600AC sliding gate
operator
1
2
Transmitter
2
3
Release key
2
4
User’s manual
1
