MANUAL INSTRUCCIONES
CODIGO 80154 REV B Marzo/2017 (Sujetas a modi
fi
caciones sin previo aviso) Pag.: 12
J
.P. SELECTA s.a.u.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel (34 93) 770 08 77 Fax (34 93) 770 23 62
e-mail: selecta@jpselecta.es - http://www.jpselecta.es
INSTALLATION
Place the "VB-1423" in the tank in his placement.
Fill the tank until the liquid level desired, always is necessary to cover
2 or 3 cm over the heating element.
Connect "VB-1423" plug to the mains, press the maing switch, the
controller display will lights on and it will be prepared to con
fi
gure the
set working temperature..
TECHNICAL FEATURES
Voltage supply 115V 50/60Hz or 230V 50/60Hz as indicated on the
characteristics plate.
Rango de regulación / Regulation range
25ºC ... 100ºC
Temperatura máxima / Maximum temperature
100ºC
Estabilidad / Stability
0.05ºC
Resolución / Resolution
0.1ºC
Error de consigna / Set error value
0.09ºC
Capacidad litros / Capacity litres
20
Medidas Recipiente
Tank dimensions (mm)
Alto / Hight
320
Ø
300
Medidas totales /
Total dimensions (mm)
Alto / Hight
470
Ø
300
Potencia calefacción / Heating power
1000W
Potencia agitación / Stirring power
60W
Peso / Weight
8 Kg.
Do not use the equipment in explosive atmospheres.
Be sure that the voltage supply is the same as the one indicated
on the characteristic plate of the equipment.
Do not use the apparatus if it is NOT earthed.
If you have to change the plug bear in mind the following:
Blue cable: Neutral.
Brown cable: Phase.
Yellow/green cable: Earth.
