25
Video Gain Control
Gain Modes
Normal
:
Automatic gain control of the input
video is enabled. This mode should be
used when normal video input signals are
fed to the MP1600/BMP1600.
Manual
:
Automatic gain control is disabled.
The previous settings for the gain are used
to increase or decrease the input video
signal.
Reset
:
Reset the settings for the gain to
the factory default values. Use of this
option is recommended the first time
MANUAL
gain mode is enabled or when the
manual adjustment goes out of control.
After resetting the gain, the
MP1600/BMP1600 will automatically
proceed to the
ADJUSTMENT
screen for
review of the settings. See page 26 for
details.
Adjust
: Enter the
ADJUSTMENT
screen to
adjust the gain for each video input. See
page 26 for details.
Proper installation and use of standard
video equipment will maximize the
capabilities of the MP1600/BMP1600.
However, in certain installations or with the
use of non-standard video equipment, it is
possible the MP1600/BMP1600 will receive
unusually strong or weak input signals. In
most conditions, the MP1600/BMP1600
can stabilize video input signals. In
extreme conditions, it may be necessary to
manually adjust the video input signals
using the manual video gain control.
Entering Video Gain Control
Setup
1. Move the cursor to V Gain in the
options menu. Select V Gain by
pressing the
ENTER
button. The
ENTER
button is the same as the
PLAYBACK
button when the MP1600/
BMP1600 is in user setup mode.
2. The previously selected mode will
flash.
3. Use the
? ?
or
? ?
button to select
one of the four available modes.
The
? ?
and
? ?
buttons are the
SPLIT/SW
and
FREEZE
buttons,
respectively, while the MP1600/
BMP1600 is in user setup mode.
ADJUST
V GAIN
Advanced Configuration
Video Gain
