background image

9

.

Gas odor with extreme yellow tipping of flame.

.

Heater does NOT reach the desired temperature.

.

Heater glow is excessively uneven.

.

Heater makes popping noises.

.

Spiders and insects can nest in burner or orifices.
This dangerous condition can damage heater and
render it unsafe for use. Clean burner holes by using
a heavy-duty pipe cleaner. Compressed air may help
clear away smaller particles.

.

Carbon deposits may create a fire hazard. Clean
dome and burner screen with warm soapy water if
any carbon deposits develop.

Note: In a salt-air environment (such as near an ocean),
corrosion occurs more quickly than normal. Frequently
check for corroded areas and repair them promptly.

TIP:

Use high-quality automobile wax to help maintain the
appearance of your heater. Apply to exterior surfaces from
the pole down. Do not apply to emitter screen or domes.

Storage

Between uses:

.

Turn Control Knob OFF.

.

Disconnect LP source.

.

Store heater upright in an area sheltered from direct
contact with inclement weather (such as rain, sleet,
hail, snow, dust and debris).

.

If desired, cover heater to protect exterior surfaces
and to help prevent build up in air passages.

Note: Wait until heater is cool before covering.

During periods of extended inactivity or when

transporting:

.

Turn Control Knob OFF.

.

Disconnect LP source and move to a secure,
well-ventilated location outdoors.

.

Store heater upright in an area sheltered from direct
contact with inclement weather (such as rain, sleet,
hail, snow, dust and debris).

.

If desired, cover heater to protect exterior surfaces
and to help prevent build up in air passages.

.

Never leave LP cylinder exposed to direct sunlight or
excessive heat.

Note: Wait until heater is cool before covering.

Service

Warranty

Repair to gas passages and associated components

1 YEAR LIMITED WARRANTY - CUSTOMERS IN CANADA

 

 

      IMPORTANT

Only return this product to the store if it was purchased within 90

days. If you have problems after 90 days of purchase, please

email our customer service department for any questions or

concerns: parts@jrhome.com OR PLEASE CALL1-800-561-5550

DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY

SERVICE.

WARRANTY

This product is inspected, tested and carefully packaged to

minimize the chance of damage during shipment. If a part

(excluding light bulbs and fuses*) within one year from the date of

purchase proves to be defective in material or fabrication under

normal use, the part will be repaired or replaced. The Company's

obligation under the warranty is to replace or repair defective parts

at our discretion. Any expenses or damage resulting from the

installation, removal or transportation of the product will the

responsibility of the owner and are not covered by this warranty.

The owner assumes all other risks arising out from the use or

misuse of the product. The warranty will be void if the product

damage or failure is deemed by the Company to be caused by

accident, alteration, misuse, abuse, incorrect installation or

removal, or connection to an incorrect power source by the owner.

The Company neither assumes, nor authorizes any person or

entity to assume for it any obligation or liability associated with its

products. * Light bulbs and fuses are not covered under this

warranty. If you have any questions regarding the warranty or

service, please call our toll free number: 1-800-561-5550

Customer Service / Imported by:

JR Home Products

Unit 1 - 5628 Riverbend Drive Burnaby

BC Canada V3N 0C1

Toll Free: 1-800-561-5550

E-mail: parts@jrhome.com

should be done only by a qualified service person.

Caution:

Always

allow

heater

to

cool

before

attempting service.

Summary of Contents for Paramount PH-T-107-MK











Reviews: