| Page 9
MOUnTing PlaTe insTallaTiOn
a. Fastening the Mounting Plate :
use a square and
make sure the bottom sill track and the mounting
plate are completely perpendicular.
using a pencil, mark
one
hole at the top and
bottom of the mounting plate.
Note:
There are 3 holes provided at the top and
the bottom, however only choose one of the holes
that best fits your installation to provide a
secure fit.
B.
now using the drill bit, drill one pilot hole at the
top and one at the bottom of the mounting plate.
use two mounting plate screws #8 to secure the
mounting plate.
C.
Insert the drill guide into the track endcap #2 and drill a pilot hole.
remove the drill guide #10 and secure the endcap #2 with an endcap screw #7.
cover the endcap #2 with a screw cover #5.
#7
#6
#10
#5
#8
A
B
C
1
C
2
C
3
