49
jr 12X ProgrAmmIng
The following activation and setup procedure should be used for JR 12X systems. Prior to activating the CCPM
function, it is first suggested that the data reset function be performed to reset the desired model number to be
used back to the factory default settings.
Caution
: Prior to performing the data reset function, it will be necessary to select the desired model
number to be used.
A) Model Select/Data Reset
Press the ENT key while turning the power switch on to enter the system mode. Next, move the cursor to the MODEL
SEL function. Press the roll selector to enter the model select function. Select the desired model number to be used,
then press the roll selector. Next, move the roll selector to highlight LST, and press the roll selector. Move the roll
selector to highlight MDL RESET, then press the roll selector. Press the CLEAR key, then press YES to reset the data of
the current model selected.
B) Device Select
Move the roll selector to highlight the Device SEL function, then press the roll selector to access the Device Select
function. Next, move the cursor to the OUT: column in the GEAR row and select the GOV setting. Next, move the
cursor to the OUT: column in the AUX2 row and select the GYR setting.
Summary of Contents for Vibe 90SG
Page 77: ...77 ...
Page 105: ...105 ...