57
jr 7202 And sPeKtrum dX7se And dX7: ProgrAmmIng
The following activation and setup procedure should be used for the JR 7202, Spektrum DX7se and DX7 systems.
Prior to activating the CCPM function, it is first suggested that the data reset function be performed to reset the
desired model number to be used back to the factory default settings.
Caution
: Prior to performing the data reset function, it will be necessary to select the desired model
number to be used.
A) Model Select/Data Reset
Press the Down and Select keys while turning the power switch on to enter the system mode. Next, move the
cursor to the MODEL SEL function with the UP key. Select the desired model number to be used with the increase
or decrease key. Next, press the UP key until MODEL RESET is displayed. Press the CLEAR key, then press YES to reset
the data of the current model selected.
B) CCPM Activation
Press the UP key until the SWASH TYPE function is displayed, then press the INCREASE key to select 120 CCPM type
as shown.
Summary of Contents for Vibe 90SG
Page 77: ...77 ...
Page 105: ...105 ...