Socket Head Bolt, 3x12mm (2pcs)
Cross Member, 20mm
Tail Support Clamp Lower
Tail Support Clamp Upper
Tail Brace Tube (2pcs)
Tail Brace Connector (4pcs)
Horizontal Fin
Flat Washer, 3mm (4pcs)
Socket Head Bolt, 3x25mm (2pcs)
Socket Head Bolt,
2.6x12mm (4pcs)
Nylon Lock Nut,
3mm (2pcs)
d
e
R
)
2
x
(
)
4
x
(
d
l
e
W
B
J
Position the horizontal fin so that it is
level to the building surface (90 degrees
to the main rotor shaft) and tighten the
two Tail Support Clamp Bolts.
5-8
TAIL BOOM BRACE ASSEMBLY
5-9
TAIL BOOM BRACE INSTALLATION
37
Socket Head Bolt, 2.6x12mm (4pcs)
Socket Head Bolt, 3x12mm (2pcs)
Nylon Lock Nut, 3mm (2pcs)
Flat Washer, 3mm (4pcs)
Socket Head Bolt, 3x25mm (2pcs)
Cross Member, 20mm (1pc)
Note the proper direction
of Tail Brace Connectors.
Note the proper direction
of Tail Support Clamp.
d
e
R
)
2
x
(
Fully tighten bolts
in Step 2-11
at this time.
