C) D/R and EXPO Selection
Turn the power switch on, then press the ENT key to enter the function mode. Move the roll selector to
highlight the D/R and EXPO function, then press the roll selector to enter the function. Set the Dual Rate and
Expo values as desired, below are suggested settings. Press the LST key to return to the menu.
D) Servo Reversing
Move the roll selector and highlight REV.SW on the screen, then press the roll selector to enter the function.
Next, reverse channels 1, 4, and 6 by moving the Roll selector, and pressing as needed to change from NORM
to REV. Press the LST key to return to the menu.
46
