14 | Introduction
III.6 Rate of turn signal output function
The rate of turn of the ship can be outputted as an analog signal from this system. Refer to the finished plan maintained in the
ship for details of the analog signal.
• When "EXT" is selected: Rate of turn of the vessel is not outputted.
III.7 Timer Start
The Gyro Compass can be automatically started according to date and time set for the departure.
Note
It can be set up to one month maximum.
For setting up the departure date and time, operate according to paragraph 2.5.2
Set Timer Starting Time
III.8 Function of the External Heading Sensor
When the external heading sensor signal (the magnetic compass system, etc.) is connected to the AlphaMidiCourse Mk2,
the repeater signal (serial signal or step signal) can be sent from this system by using the external heading sensor.
Also when the processing unit for the external heading sensor signal is built into the AlphaMidiCourse Mk2 as an option,
the repeater signal (2 circuits for serial signal and 1 circuit for step signal) can be backed up by using the external heading
sensor, even if the Gyro Compass stops.
Note
For the system selection, refer to paragraph 2.6
Heading Sensor Selection.
III.9 Pendulum Function
The AlphaMidiCourse Mk2 includes a pendulum function that enables the heading to be changed by 180°
Once the Gyrocompass has achieved a true heading it is possible to changed 180° by closing an contact also a buzzer
will signal 5 times. By opening the contact your heading will be changed 180° back and also a buzzer will signal 5 times.
Refer to paragraph 2.7
Pendulum Function.
Note
For the Pendulum selection, refer to paragraph 1.5
DIP switch settings.
Summary of Contents for ALPHAMIDICOURSE Mk2
