42 | Web server
8.4
Accessing the built-in web server
To access the built-in web server of the LT-3110 Control Unit, please complete the following steps:
1.
Connect the LT-3110 Control Unit directly to a PC using an Ethernet cable, or connect the LT-
3110 Control Unit to a Local Area Network (LAN), where a PC is connected.
2.
Identify the IP address that is assigned to the LT-3110 Control Unit. The IP address can be
read out from the UI Display interface (Menu -> System -> Network: IP Address). The IP
address is valid if
the ‘Link Status’ is showing ‘Up’. The IP address is assigned dynamically by a
DHCP server.
3.
From the PC, start a browser (e.g. Microsoft Edge, Explorer, or Chrome) and type in the IP
address, which was identified in the LT-3110 Control Unit (e.g. 169.254.1.1).
4.
The browser might show you a warning about an invalid web server certificate, as illustrated
in Figure 27. Make sure, that you have typed in the correct IP address.
5.
Press ‘Details’ and you will be presented for an extended page view (including a link), which
will direct you to the Alphatron LT-3100 Iridium
dashboard ‘Go on to the webpage (Not
recommended)’.
6.
You will now see the Alphatron LT-3100 Iridium dashboard.
Figure 27: Accessing built-
in web server (‘This site is not secure’)
Summary of Contents for Alphatron LT-3100 Iridium
