Name
Use informative names for paging zones to make configuration process easier. E.g.“All call”.
Created Paging Zones are used later when setting out Control panel’s Function keys, AAI 800 Control buttons, Control
Inputs and Events definition.
Amplifiers
Select outputs to be included in Paging Zone. Each amplifier output is possible to choose to each paging zone. Locked
groups are shown as a one line and name; other amplifiers on locked group are in grey.
There are also two line levels paging outputs that can be selected to paging zones. One for System bus and one for
Local bus.
Note If Local 0dBu line is chosen, the paging should come from a Unit connected to Local bus. System bus line
can be used only for announcements from System bus units.
Priority
When override voltage (+24V DC) is used for override line attenuators or speaker volume controllers, priority selection
will add override voltage control from DIGITAL AMPLIFIER to be active during the paging. With this function you can
42 | AlphaAnnounce Software Configuration
