41
RADAR FAILURE CHECKLIST
When ordering for repair, check the following items, fill in the sheet and send it to us. If there is any
uncertain items, contact your ship and give us correct information on the product.
Ship name:
Phone:
Fax:
Radar general model name: JMA-1541
Serial No.:
(1) Check the following items in the order of the number, and circle the applicable answer between
YES or NO.
If the item cannot be determined as YES or NO, explain in detail in the item (15), Others.
(2) If any of the items (1) through (4) is marked as NO, check the fuse of the product.
(3) Check the items (4) through (14) while the transmission (TX) is ON.
* Functions mentioned in the items (14) through (15) may be optional. If the function is optional, answer is not necessary.
No.
Check Item
Result
(1)
Power can be turned on. (The lamp on the operation panel is lit.)
YES
NO
(2)
A few minutes after powering-on, it will become stand-by status (TX Ready).
YES
NO
(3)
When powering-on (or TX ON), the CRT displays something (CRT is lit).
YES
NO
(4)
The scanner unit rotates at the transmission (TX) ON.
(Check the following items while transmission is ON.)
YES
NO
(5)
Tuning is enabled. (Check with the range of 6NM or more.)
YES
NO
(6)
Fixed marker is displayed.
YES
NO
(7)
VRM is displayed.
YES
NO
(8)
White noise is displayed while set at SEA, RAIN minimum, GAIN maximum,
YES
NO
IR-OFF and range 24 NM.
(9)
Target reflection echo is displayed.
YES
NO
(10)
Sensitivity of reflection echo is normal.
YES
NO
(11)
EBL is displayed.
YES
NO
(12)
Cursor mark moves.
YES
NO
*(13)
GYRO course can be set and normally displayed.
YES
NO
*(14)
LOG speed can be normally displayed.
YES
NO
(15) Others (Error message, etc.)
AFTER-SALES SERVICE
41
RADAR FAILURE CHECKLIST
When ordering for repair, check the following items, fill in the sheet and send it to us. If there is any
uncertain items, contact your ship and give us correct information on the product.
Ship name:
Phone:
Fax:
Radar general model name: JMA-1541
Serial No.:
(1) Check the following items in the order of the number, and circle the applicable answer between
YES or NO.
If the item cannot be determined as YES or NO, explain in detail in the item (15), Others.
(2) If any of the items (1) through (4) is marked as NO, check the fuse of the product.
(3) Check the items (4) through (14) while the transmission (TX) is ON.
* Functions mentioned in the items (14) through (15) may be optional. If the function is optional, answer is not necessary.
No.
Check Item
Result
(1)
Power can be turned on. (The lamp on the operation panel is lit.)
YES
NO
(2)
A few minutes after powering-on, it will become stand-by status (TX Ready).
YES
NO
(3)
When powering-on (or TX ON), the CRT displays something (CRT is lit).
YES
NO
(4)
The scanner unit rotates at the transmission (TX) ON.
(Check the following items while transmission is ON.)
YES
NO
(5)
Tuning is enabled. (Check with the range of 6NM or more.)
YES
NO
(6)
Fixed marker is displayed.
YES
NO
(7)
VRM is displayed.
YES
NO
(8)
White noise is displayed while set at SEA, RAIN minimum, GAIN maximum,
YES
NO
IR-OFF and range 24 NM.
(9)
Target reflection echo is displayed.
YES
NO
(10)
Sensitivity of reflection echo is normal.
YES
NO
(11)
EBL is displayed.
YES
NO
(12)
Cursor mark moves.
YES
NO
*(13)
GYRO course can be set and normally displayed.
YES
NO
*(14)
LOG speed can be normally displayed.
YES
NO
(15) Others (Error message, etc.)
AFTER-SALES SERVICE
Summary of Contents for Radar 3000
