©JRI Maxant
12
T° OK (voyant vert) s’allume
pendant 10’’.
Témoin d’alarme (rouge)
s’allume pendant 10’’.
¾
Full memory: the recorder stops when its memory is full.
¾
With the software: you can put the Mini SPY RF GREEN in standby mode with Sirius when you do not use your recorder.
¾
With the pushbutton: this option is valid only if the Mini SPY RF GREEN is configured in transport mode with a start by pushbutton.
j)
Auto control or top zone
The type of action depends on the Mini SPY RF GREEN configuration. TOP ZONE = Transport mode and
AUTO CONTROL = Storage mode.
This function enables you to customise an action of measurement check-up. You just have to press shortly on the pushbutton.
The action is recorded and will appear on the curve when you process the data with your software Sirius.
k)
Leds and pushbutton actions fonctionning
The green led is on 2’’ when the measurement starts and then flashes each 1’ in recording mode.
Specials fonctioning regarding the recorder using mode
Device set up in storage mode
Pushbutton pressing
Mode
< 5"
5’’> pressing <10’’
OFF
-
The 2 leds are on and flash at the
same time.
Waiting setup
Red led 2"
-
Starting measurements
Pushbutton
Green led 2" = beginning of measurements
-
Delayed (date & time)
-
-
Immediatly -
-
Mesure
Green led 10" = auto control
-
Device set up in transportation mode
Pushbutton pressing
Mode
< 5"
5"<appui>10"
Off
-
The 2 leds are on and flash at the same
time.
Waiting setup
Red led 2"
-
Starting measurements
Pushbutton
Green led 2" = begining of
measurements
-
Delayed (date & time)
The 2 leds are on and flash at the same
time = Waiting for starting measurements
Immediatly
-
The 2 LEDs are on and then flash
alternatively = ending measurements
Mesure
Green led 10" = Top zone
The 2 LEDs are on and then flash
alternatively = ending measurements
To stop your Mini SPY RF BLACK, press between 5 and 10”
on the button: