©JRI
5
IV.
USE
a)
Stop
When you receive it, your Mini SPY RF GREEN is stopped. Only the time clock is active. It can neither
emit nor receive anything.
b)
Start
To start your Mini SPY RF GREEN, please press between 5 and 10”
on the button:
- the 2 LEDs are on and flash at the same time
- all the display segments are also on
- Mini SPY RF GREEN is now in waiting mode
Remark: If you press >10’’ => no effect => remains off
c)
Waiting mode
The red led will be on 2’’ if you press 5’’ on the push button. In this case, the Mini SPY RF GREEN is
waiting for programming
Configuration
Mini SPY RF GREEN configuration is done from the Sirius software and then transferred into your
Mini SPY RF GREEN by radio frequency.
d)
Measurement start
The Mini SPY RF GREEN has 2 starting mode:
automatic start
manual start
e)
Automatic start
Your Mini SPY RF GREEN starts recording:
automatically when the configuration is transferred,
at a programmed date and time:
dd / mm / yy
hh / mm / ss
Working LED (green):
2’’ => starting measurements
then flashes every 2’’
Working LED (green):
2’’ => starting measurements
then flashes every 1 minute
