KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
130
Job description
Preparation for
running-in
Execution of
running-in
Completion of
running-in
Notes
Check and adjust, if required:
- drive belt tension
●
- travel of brake chamber stems of the
service brakes
●
- fuel injection lead angle:
- for YaMZ-238ND engine
●
- for 8481.10 engine
●
Expansion gaps in the valve mechanism,
after tightening the nuts of cylinder heads
or rocker pivots:
- for 8481.10 engine
●
- for YaMZ-238ND engine
●
Replace oil:
- in the engine lubrication system
●
- in the gearbox hydraulic system
●
- in cases of the main and final gears of
driving axles
●
Set the pressure in tyres
●
Check the condition of tyres and air pres-
sure therein
●
Check the engine drive belt tension and
adjust it, if required
●
Check the electrolyte level, condition of
terminals and vents in storage battery
plugs. If necessary, refill distilled water.
Lubricate the non-contact parts of terminals
and wire lugs with petroleum jelly
●
●
Check the electrolyte density and, if
necessary, bring it to the required value
depending upon the climatic area where
the tractor is operated
●
Check the condition of filter elements of the
1st and 2nd air cleaner stages and, if
necessary, perform their maintenance
●
