KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
16
2.2 SAFETY MEASURES DURING DEPRESERVATION, INSTALLATION,
TEST OPERATION AND RUNNING-IN
In the course of tractor washing, application and
removal of lubricants and paintwork coatings the
workers shall be provided with aprons, gantlets and
protective goggles.
Prepare the tractor for operation only with the engine be-
ing shut down and the parking brake being pulled up;
mounted implements shall be lowered.
IT IS PROHIBITED
to be under the
tractor as well as in the area under the
hinge pivot device of the frame with the
engine being in operation.
During depreservation, installation, assembly, test operation and running-in follow the guide-
lines set forth in the corresponding sections.
Perform depreservation and preservation of the tractor in a specially equipped room with ob-
servance of all occupational and industrial safety regulations and fire safety regulations.
2.3 SAFETY MEASURES DURING TRACTOR OPERATION
Before starting the engine, the change-gear lever and the change-mode level shall be in the
“Neutral N” position (Fig.15); levers of the hydraulic distributor of mounted implements shall
be in the “Neutral” position; the parking brake shall be pulled up.
Before taking off, make sure that the road is free, that there are no people between the trac-
tor and the agricultural implements as well as in the area of frame hinge pivot device. Issue a
warning sound signal at the beginning of movement.
Before leaving the tractor, set the change-gear lever and the change-mode level into the
“Neutral N” position (Fig.5); levers of the hydraulic distributor of mounted implements - into
the “Neutral” position; pull up the parking brake and shut down the engine.
