KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
24
If needed to perform a repair in field conditions with the use of electrical gas welding, the
parts and assembly units shall be pre-cleaned and washed to remove the fuel and lubricants.
When washing the parts and assembly units with kerosene or petrol, take measures to pre-
vent inflammation of washing fluid vapors.
Do not admit accumulation of strawy products on the engine.
See for the serviceability and timely charging of the fire-extinguisher.
When the engine shuts down, switch off the battery master switch.
Periodically clean the exhaust pipe from sludge and carbon deposit.
IT IS PROHIBITED
to use open fire to heat pipelines, oil in the engine tray, and when filling
fuel and oil.
In case of occurrence of a fire source, it is necessary to do the following:
switch off the battery master switch (de-energise the system);
stop the fuel feed;
extinguish the center of fire with the use of the fire-extinguisher or any other means at
hand.
Do not pour water onto burning fuel.
In order to avoid an explosion of storage batteries,
IT IS PROHIBITED
to work with the trac-
tor at a voltage exceeding the voltage controller level set in accordance with the ambient
temperature.
IT IS PROHIBITED
to use fuses with rated value contradicting to the electrical diagram val-
ue.
When working with the tractor, it is prohibited to wear a uniform impregnated with oil and fuel.
Do not admit leaks of fuel and oil at pipeline connection joints. Spilt fuel and oil should be
wiped.
Do not permit sparking from the exhaust pipe, which can be the cause of fire and serve as
the evidence of abnormal operation of the fuel equipment.
