USinG The On-BOaRd VideO cameRa
fiTTinG
1. Pressing the camera button starts the camera
recording. Pressing the button a second time will
stop the recording.
2. The light under the video camera will glow green
when in standby mode and will fl ash red when
the camera is recording.
3. When the Micro SD card memory is full, the
light will fl ash red and green continuously. The
memory must be emptied before the camera
can record more or a new card must be
installed.
4. To view what has been recorded, remove
the Micro SD card from the rear of the
video camera by pressing lightly on
the SD card and releasing. This will spring
the card out of the slot.
5. The Micro SD card can now be used as a
fl ash drive and contains all of the
recorded video. Slot the SD card in the
USB card reader and insert in computer.
6. Go to the unnamed drive. The recorded
videos will be in the folder named DCIM.
The fi les can be played on several media
players.
nOTe:
The camera does not record sound.
The SD card should be installed as shown in pic. 5
STicKeR PlacemenT
