- 4 -
Cable Thermocouple Temperature Sensors for Plastic Industry T1565
3.1 Application
Cable thermocouple temperature sensors T1565 with cable
connecting line (firmly connected) are designed for tempera-
ture measurement at devices for plastic industry and similar
applications.
3.2 Description
A single thermocouple sensor type “J“ or “K“ is placed in the
stem of measuring insert. The stem continues by stainless
steel spring with extended termination. Position of the bayonet
cap is adjustable through the entire length of the spring. Sen-
sors are mounted into the bore by bayonet cap and by optional
connecting pipe union, which can be also supplied.
4. Installation, operation and maintenance
4.1 Installation and commissioning
4.1.1 General
Sensors are connected directly to the decoding device or to the
terminals of associated cabinet.
4.1.2 Commissioning
The sensor is ready for operation after connection of the
connection wires to the terminals of the associated apparatus.
Thermocouple “K“ Thermocouple “J“
GN - green, BK - black, WH - white
4.1.3 Electrical connection
4.2 Operation and maintenance
Sensors do not need any maintenance.
It is recommended to check the mounting of the sensors at
preselected intervals.
To ensure metrological parameters of the sensors, periodic
checks of calibration parameters must be performed. Period
of calibrations is set by the user and it is based on operating
conditions and internal metrology regulations. Manufacturer’s
recommended period is 12 months. If there is during the
calibration found difference from the expected metrological
parameters, it is necessary to replace the sensor.
• Thermocouple 1x “J“, “K“.
• Measuring range -50 to +800 °C.
• Accuracy class 1, 2 acc. to EN 60584-1.
• Insulated measuring junction.
• Stem diameter 6 and 8 mm, peak angle 120°.
• Stem material stainless steel 1.4401.
• Full stainless steel design.
• Adjustable suspended bayonet cap 15 to 190
mm with inner diameter 12.2 to 15.2 mm / 2 slots.
• Optional length, insulation and wiring termination.
• Optional connecting pipe union.
• Housing up to IP 67.
T1565
Cable Thermocouple Temperature Sensors
for Plastic Industry
3. Product description
L2
200
AL
L
L1
120°
ØD
ØD2
ØD1
NB1
NB2
NB5
NB4
WH
WH
GN
BK +
-
+
-
WH
WH
GN
BK +
-
+
-
