background image

1

2

1. Important Caution

2. Features

Always makes all connections before plugging the unit into an AC power outlet.

• 

Do not leave the device in a place neither with high temperature nor high humidity.

• 

Always do not handle the power cord with wet hands!

• 

Keep the devices away from fire and heat sources.

• 

Makes sure receiver/transmitter are in the same preset channel or frequency.

• 

3. Specification

3-1 UHF PLL Dual Channel Diversity Receiver // US-936K

3-2 UHF PLL Handheld Transmitter //  Mh-936K

Frequency Preparation......

Carrier Frequency Range

S/N Ratio...................................

T.H.D..............................................

Display...........................................

Display Contents...................

Controls.......................................

Audio Output Level.............

AF Output Impedance.......

Operation Voltage.................

Output Connector................

Dimension(m/m).................

PLL Synthesized Control

36MHz within 502~960 MHz

>105dB

<0.6%@1KHz

LCD/LED

Channel, Antenna A/B, Mute Display, RF/AF Level Meter, 

Low battery, SQ

Power On/Off, Frequency Up/Down, Volume, SQ, 

Preeset channel 001~225

-12dB

600Ω

12-18 VDC, 500mA

3 unbalanced Ø6.3mm  phone jack

210mm(W) * 40mm(H) * 172mm(D)

Frequency Preparation...........

Carrier Frequency Range.....

RF Outputs....................................

Stability...............................................

Frequency Deviation...............

LCD Display..................................

Controls............................................

Spurious Emissions...................

Audio Frequency Response

Battery.................................................

PLL Synthesized Control

502~960 MHz

Lo:3mW , Hi:10mW

(Depend on Local Regulation)

±10KHz

±48KHz

Preset channel, Battery Fuel Gauge, Frequency

Power On/Off,  Frequency Up/Down, 

Lock-on Mode,Preset channel,A or B channel 

select, RF outputs adjust, Gain control

<-50 dBC

50~16,000 Hz

UM3, AA 1.5V*2

At super-wide band of 36 MHz, specially intended for exquisite KTV rooms and classrooms

• 

Operation functions designed to be user-friendly

• 

Preset with 225 pairs of channels

• 

Unprecedented 001-225 coded reception/transmission channels 

• 

Dual channel (receiving) set with one key

• 

All-new D-36K highly sensitivity and anti-feedback capsule

• 

Adjustable squelch level at front panel

• 

Summary of Contents for F-36K










Reviews: