24
5. Microphone Attenuate
5-1 Press down SET button for 3 second, The 3 digits of frequency or channel on the left of
the LCD begin to blink.
5-2 Press the SET button several times until the “Att On “ or “Att OFF” on screen.
(1)Press
▲:
Att ON; -10dB attenuation.
(2)Press
▼:
Att OFF; No attenuation.
(3)Press SET key to save the setting.
6. RF Outputs adjusting
6-1 Press down SET button for 3 second, The 3 digits of frequency or channel on the left of
the LCD begin to blink.
6-2 Press the SET button several times until the “rFP Hi “ or “rFP Lo” on screen.
(1)Press
▲:
“rFP Hi”, high transmitting power.
(2)Press
▼:
”rFP Lo”, low transmitting power.
(3)Press SET key to save the setting.
7. Setting key lock
7-1 Press down SET button for 3 second, The 3 digits of frequency or channel on the left of
the LCD begin to blink.
7-2 Press the “SET” button several times until the “Loc On “ or “Loc OFF” on screen.
(1)Press
▲:
“Loc On “, the Body-pack panel key
functions are locked; To unlock,
press “SET” button for 3 second
(“Loc On “begin to blink),
Press
▼
to unlock.
MHz