- 11 -
Step 4: rotate the round button in the middle and put the cursor on
“Charge” and then
press
“TAB/SYS” to perform data setting on the right side. Set the “LiPo Cap”as
“Ignore”, and “Cells” as “22.2V 6S”, and “Current” as “15A”, and “Chg Mode” as
“Normal Balance”.
（
Figure 1.3.3
）
Step 5: rotate the cursor to "Start", and click rotary switch to confirm, and you just need
to select "YES" to charge the lithium battery, as shown in Figure 1.3.2.
（
Figure 1.3.4
）
The
charging is
confirmed.
Char
ging
curre
nt
