- 21 -
(3)Instructions for functional interfaces
a.High-precision voltage display:
It will display the voltage of battery of ground control station in real-time, and it has
functions of Low Voltage Alarm. It is suggested that, when the voltage of core of single
battery is lower than 3.6V (the voltage of lithium battery is lower than 21.6V), you need
to stop using or replace the battery.
b.network connection:
For the ground control station, you need to connect the cable to the network access on
the panel, and then click the "start" on the table of ground control station, and select
"control panel", and enter the interface of "adjust the settings of the computer
”; click to
enter "view network status and tasks", and select "change the adapter settings" and
enter "Local Connectivity"; perform "automatically obtain an IP address" to access the
network. The schematic diagram for connecting network operation is shown as Figure
3.1.3.
（
Figure 3.1.3
）
Wireless WIFI connection: for the ground control station, start the WIFI connection and
double click the option of trapezoid signal at the lower right corner below the figure to
display the wireless name of current environment, and double click the corresponding
wireless name and enter the password to access the network. The schematic diagram
of operation is as shown by Figure 3.1.4.
