- 37 -
Please make sure that the UAV is in the open area, and all the personnel are in the
safe area, and keep the UAV away from the restricted zones such as airport and so on.
Make sure that all sensor modules are properly calibrated before flight;
When guiding the flight, it will switch to [GUIDED] status, and you can't operate the
Throttle and all directions of UAV with the remote; if you want to control it with remote,
you need to switch UAV to [STAB] or [GPS] mode.
1.On the Quick Access Toolbar
2.On the instrument board
3.3.7. Guided flight
➢
Guide the UAV to the designated point, and double-click the map to realize the
designated point flight in the GUIDED cruise and automatic cruise.
1)If it is ensured that the flight area and height is safe, you can guide the aircraft to
desired height.
2)Double click any positions on the map interface to realize the flight with designated
point, and the UAV will reach the designated point.
3)During the flight with GUIDED points, you can change the height and speed through
the height and speed on the instrument board
；
4)If you start the rail, UAV will not execute the command outside the rail.
