- 47 -
lines of GUIDED point, and click [change the height] to change the height of selected
GUIDED point in bulk;
b. in the map interface, hold the Ctrl key, and select the corresponding GUIDED point
by holding the left mouse button and dragging box or click the corresponding GUIDED
point. You can input the values to be changed in the height input box and click the
"change the height" to change the height of selected GUIDED point;
c. Enter the GUIDED planning interface and enter the new height values in the [height
(m)] above the GUIDED list, and check the box of [check all] beside it. Click the
[change the height] beside it to change the height of all GUIDED points;
3)Change the lingering time:
✓
Change the lingering time of single GUIDED point:
a. Enter the GUIDED list, and enter the new lingering time in the box of lingering time
of GUIDED point, and the lingering time of single GUIDED point can be changed if it is
out of focus;
b. Enter the GUIDED planning interface and select the GUIDED point in the GUIDED
list, and enter the new time values in the [lingering(m)] above the GUIDED list, and
click the [change the height] beside it to change the lingering time of single GUIDED
point;
✓
Change the lingering time of GUIDED point in bulk:
a. In the GUIDED list, hold the Ctrl key, and select the lingering value of GUIDED point
or select the lines of GUIDED points, enter the new time value in the [lingering(s)]
above the input box of GUIDED list, and click [change the time] to change the lingering
time of selected GUIDED point in bulk;
b. in the map interface, hold the Ctrl key, and select the corresponding GUIDED point
by holding the left mouse button and dragging box or click the corresponding GUIDED
point. You can input the new time values in the [lingering(s)] above the lingering input
box/list and click the "change the time" to change the lingering time of selected
GUIDED point;
c. Enter the GUIDED planning interface and enter the new time values in the
[lingering(s)] above the GUIDED list, and check the box of [check all] beside it. Click
the [change the time] beside it to change the lingering time of all GUIDED points;
4)Delete the GUIDED point
✓
Click [clear all GUIDED points] to clear all GUIDED points in the GUIDED
