- 52 -
1)You can click [status switch]
＞
[LAND] to land the aircraft;
2)You can click [LAND] on the shortcut menu column to land the aircraft;
3)You can click [direct LAND] on the instrument board to land the aircraft.
Note: make sure that there is no shielding or personnel under UAV.
3.3.12. RTL
➢
It makes sure that UAV performs RTL based on the minimum set RTL height and
lands on HOME point (the minimum RTL height can be set in [parameter setting]
＞
[geographical rail]), and now the mode is displayed as [RTL]
1)You can click [status switch]
＞
[RTL] to perform RTL;
2)You can click [RTL] on the shortcut menu column to perform RTL;
Note:
if RTL is implemented when the flight height exceeds the minimum RTL height
that has been set, the RTL is made based on the current height; when the flight is
lower than the minimum RTL height that has been set, it will rise to the set RTL height
and then continue to cruise.
3.3.13. HOVERING
➢
It turns UAV to GPS status, and it relies on GPS. The mode is displayed as [GPS]
