- 17
-
OPERATION
COMPUTER OPERATION
The Cyclo-6 computer allows you to track your speed, rpm (cadence), time, distance and an
estimate of calories burned. For the time, distance and calories, you can choose between tracking
your progress so far or what you have remaining from a target value. You may for example choose a
distance you wish to cycle and you can then view how far you have left to travel.
After you have reached your target time, distance or calories, the computer will beep 8 times and
then begin counting that value upwards if you continue to exercise.
BUTTONS:
MODE:
Press this button to confirm a setting.
RESET:
Press this button and hold for 2 seconds to reset all function figures.
SET: Use this button to set up target values for either TIME, DISTANCE or
CALORIES. You can hold the button to increase the value quickly. (N.B. You
cannot use this feature if the computer is in operation)
FUNCTIONS
：
SCAN:
Scans through all the functions listed below, displaying each one for a few
seconds:
RPM:
Displays the pedaling Rotation Per Minute (Cadence). The RPM and SPEED will
switch to another display every 6 seconds after you have begun cycling.
SPEED:
Displays the user’s exercise speed.
TIME:
Displays the time elapsed or if you have input a target time, it will display time
remaining.
DISTANCE:
Displays the distance travelled or if you have input a target distance, it will display
distance remaining.
CALORIES: Displays an estimate of calories burned or if you have input a target value for
calories, it will
display calories left to burn.
RESISTANCE OPERATION
The JTX Cyclo-6 has infinite tension adjustment. By turning the tension adjustor you can make
micro adjustments to the resistance either before or during exercise. By pushing the tension adjustor
downwards, you will activate an emergency stop function which will bring the flywheel to an
immediate standstill.
