JUDO i-soft TGA 2
7
Intended use
2
Intended use
Both installation and use of the water soften-
ing system are subject to the applicable na-
tional regulations.
Alongside the operating instructions, the le-
gal regulations applicable in the country and
place of use in respect of accident preven-
tion, the recognised technical regulations for
safe and professional work must be ob-
served.
The water to be softened must comply
with the European Drinking Water Direc-
tive!
The manufacturer/supplier must be consult-
ed before using water of a different quality or
water with additional additives!
The water softening system is suitable for
use in cold drinking water up to a maximum
ambient temperature of 30 °C.
It is manufactured according to the state of
the art and recognised German safety regu-
lations.
The water softening system may only be
used as described in the operating instruc-
tions. Any other use or use beyond the spec-
ified use is considered to represent incorrect
use.
Additional dangers exist in the event of incor-
rect use and in the event of non-observation
of the danger symbols and safety instructions.
The manufacturer/supplier shall not be re-
sponsible for any resulting damage. All risks
are borne solely by the user.
Intended use includes observance of the op-
erating instructions.
The manufacturer/supplier must be consult-
ed before using the water softening system
outside the limits of use described in these
operating instructions.
The water softening system must only be
used as intended in a technically fault-free
state, while maintaining safety and hazard
awareness, and in compliance with the oper-
ating instructions.
Ensure that malfunctions are rectified
immediately!
So that the waste water can be safely
drained away both during operation and also
in the event of a possible system defect, the
specifications given in chapter 4.1.1 “Requi-
rements for the place of installation” must be
closely observed!
ATTENTION
(see chapter 1.2 “Safety instructions and
dangers due to non-observation”)
The spent regenerating salt is removed from
the water softening columns together with
waste water. Therefore it must not be used
for irrigation or similar purposes.
The application range is specified in DIN EN
806-2 and DIN 1988-200 for DVGW ap-
proved water softening systems. In accord-
ance with the standard, there are no limita-
tions in respect of the area of use for this
water softening system. The designed ca-
pacity of the water softening system is such
that it is capable of partially softening the en-
tire water requirement for a single or multiple
family dwelling as well as corresponding par-
tial water quantities for hot water, swimming
pool, washing machine and dishwasher.
2.1
Water pressure
The water pressure must be between 2 bar
and 7 bar.
The water pressure must not exceed 2 bar
as otherwise the function can be impaired! If
the water softening system is not regularly
serviced, the softening function can be im-
paired.
ATTENTION
