31
6.3.
Blinking After Charging Some Time
When a Jugee battery LED is long on at the start of
charging, and then goes into blinking after some time,
the battery is in charge over-temperature protection
mode.
Battery can still continue and complete charging under
temperature protection, but charge speed will be
reduced. The methods below can effectively reduce or
eliminate impact on charge speed due to over-
temperature protection:
A.
Charge batter with MILBEP labelled charger in well
ventilated spot;
B.
Do not cover the charger with cloth, paper or other
soft fabric that can affect ventilation;
C.
Do not place the charger on top of soft fabric or
paper that can affect ventilation;
D.
Do not place charger in narrow, enclosed space
with poor ventilation;
E.
Do not place the charger on top of heater, radiator
or electric appliances;
F.
Try avoid using USB ports close to the exhaust fan
of computer;
