32
⚫
Note:
Charging battery in ambient temperature above 27
℃
can result in over temperature protection. The higher the
temperature, the higher proportion of charge time will
be in the protection mode, and the slower the charge
speed. For instance, charging in 30
℃
in well ventilated
space, charge time can be prolonged 20%.
6.4.
Blinking After Charging Over Time
When a Jugee battery LED is long on at the start of
charging, and then goes into blinking after 4 hours
charging, take the battery out of charger, wait for 5
minutes, and then place it back to charger alone. Observe
which of the following situations occurs, and follow the
suggested actions:
A.
After re-insertion, the battery LED is long on, and
can be charged to full (LED off) after 2 hours, then
the battery is normal.
B.
After re-insertion, the battery LED is long on, but
starts blinking after 2 hours, then the battery core
is likely degraded. Follow suggestions in Section
6.6.
