34
temperature of the charger cable or connectors
should be eliminated by replacing with appropriate
parts before using again.
D.
Dirt build-up on Charger or battery contacts can
increase resistance and under-power condition.
Please keep contact points on battery and charger
free of dirt.
6.6.
Indicators of Battery Fault or Degradation
Jugee battery performs diagnostics during charging, and
uses LED blinking to indicate potential fault or core
degradation conditions. If these conditions are suspected,
the following steps can be taken to make further
determination:
A.
Select a USB 5V adaptor that can charge cells
phones normally to power the Jugee charger, place
one fully depleted Jugee battery into charger, and if
the LED is long on, use this adaptor for testing other
suspected faulty HUJEE batteries.
B.
Place a single suspected faulty or degraded Jugee
battery in the charger tested in step A above. If the
battery LED immediately starts blinking, the battery
is faulty. Please do not use the battery anymore,
and contact the retailer or Jugee Customer Services.
