background image

8

Hard Reset:

When the drone fly uncontrolled and it is impossible to perform a trimming to correct the 

flight errors, it is better to perform a factory reestablishment. This setting lets the drone with 

the fabrication settings that it had when you bought it.
To perform the hard reset following the steps:

4. Place the drone on a flat, 

horizontal surface and moves 

the right and left control levers

the lower left corner for 2-3 seconds and the LED indicator will 

change to steady light flashing rapidly.
When, after 2-3 seconds, the LED back light fixed the drone 

will be restored correctly.

3. When the drone LED flash quickly, move up and lowers 

the power lever (left) to the maximum. Now the LED stops 

flashing to keep fixed.

Absolute Control function:

While the drone is operating in the normal way, without absolute control, the pilot 

must master which is the front and rear of the drone, as well as the side, so that, 

during the flight provides the correct order of movements. In this flight mode when 

the drone face you it is to know that the controls are reversed. The

 Nanodrone vCam 

HD 3 integrates a complete control system that is much simpler to piloting.

ACROBATIC MODE:

When you’ve controlled the flight and basic operation of the 

drone, you’re ready to perform some tricks and impressive 

stunts.

The first of all is that you fly at a height of more than 3 

meters, since all the stunts lead to a loss of height, and so 

avoiding that the drone crashes into the ground.

To perform its acrobatics, you have to press the button 

“aerobatics” (button located on the front right) and then 

push the direction lever (right) in the desired direction to 

make an acrobatic 360.

When the absolute control is on, the direction of the drone 

does not influence the movements since the drone moves 

towards its own direction.
To activate the mode absolute control press the button shown 

on the right side image.
To disable this mode, simply press it again.

1. Turn on 

the drone.

2. Trun on 

the control.

ON

off

CHA

ACROBATIC FLIGHT MODE ADVICES:

The drone must be with battery charged to perform the stunts.

Summary of Contents for NANODRONE VCAM HD 3











Reviews: