POWER LOSS FEATURE
The power loss feature on the iP series products ensures that in the event of a
power outage the previous state is remembered when power is returned.
Effectively this means that if you have PODs in an activated state and the
power fails, when power is restored the PODs that were previously activated
will sequence back up in accordance with the sequence delay currently active.
To enable the power loss feature, click on
iP Series Management
link on the
web interface and then click on
Configuration
tab. You will see a check box
under the Power Loss Feature section. Checking the box enables the feature.
NOTE:
Please note, a delay of up to 5 seconds can occur between issuing a command
in the web server and the iP series product storing the state. So if power is lost
just after a command has been issued the state may not be remembered.
Page 18
