background image

breaker is tripped, remove sufficient current load to reduce the total to 
no more than 15 amps, wait approximately 30 seconds after the trip-
ping, turn off the main power switch and push in the circuit breaker 
button. 
 

2. The ground lift switches have no effect on the ground loop 
noise. 

 

a. Check if the equipment powered by the Rackpower 320 is 

 

 

connected with a grounded (3-prong) plug. The ground 

 

 

lift switches can have no effect on equipment which 

 

 

 

does not use a third wire grounding connection.  

 

b. Examine the source of the noise. If the noise is not a very 

 

 

low frequency, 60 cycle hum, lifting the grounds will 

 

 

have no effect. Research other  solutions. 

 
If an observed problem is not listed here, if it can not be remedied  and 
particularly if the problem seems severe or dangerous, discontinue use 
of the Rackpower 320 and contact Juice Goose directly.  
 
REPAIR 
Should your Rackpower 320 need service contact Juice Goose of as-
sistance and authorization to return the unit. PLEASE NOTE: a return 
authorization number is required in order for the service personnel to 
correctly and promptly identify, repair and return your unit. 
 
You may obtain a Return Authorization Number  by calling: 713-772-
1404 or sending email to info@juicegoose.com. 

Reviews: