22
23
JBP-HYPERSCRMBLR2-MANUAL |
©
2021 JUICED BIKES
JBP-HYPERSCRMBLR2-MANUAL |
©
2021 JUICED BIKES
TURNING THE E-BIKE ON AND OFF
HOW TO TURN THE E-BIKE ON
1.
Press the battery power button on both batteries to turn
them on.
Fig. 24 - Battery Power Button
2.
Insert the key and turn the ignition key switch. Be sure
to have both feet off the pedals, as the torque sensor will
calibrate when turning on. The LCD display panel will turn
on and indicate the battery’s charge level and selected
pedal assist level.
Fig. 25 - Ignition Key Switch
HOW TO TURN THE E-BIKE OFF
Turn the key and remove it from the ignition. Then press both
batteries’ power buttons and the bike will shut off.
AUTOMATIC SHUTOFF
The electronic system will also automatically shut down after a
preset period of time. This duration can be adjusted in the
setup menu.
ADJUSTING THE ASSIST LEVELS
HOW TO INCREASE THE ASSIST LEVELS
When the bike is on, push and release the “assist up” button.
The assist will advance by one level until SPORT mode is
reached.
HOW TO DECREASE THE ASSIST LEVELS
To decrease the assist level, push and release the “assist down”
button. The assist will decrease by one level until ECO mode is
reached.
The default assist setting is assist level 1. This will appear each
time the e-bike is turned off and back on.
OPERATION
ACTIVATING THE HEADLIGHT
Fig. 26 - Headlight Graphic on the Main Display
TO TURN ON THE HALO LIGHT
After turning on your bike, the halo headlight will automatically
turn on.
TO TURN OFF THE HALO LIGHT
Push and hold the “assist up” button for 2 seconds and the halo
headlight will turn off.
TO TURN ON THE FULL HEADLIGHT
Use the combo switch located on the left side of the handlebar
and switch the button up to turn it on.
TO TURN OFF THE FULL HEADLIGHT
Use the combo switch located on the left side of the handlebar
and move the button down to turn it off.
ACTIVATING THE TURN SIGNALS
You can find the turn signal switch just below the headlight
button. Toggle the switch left to turn on the left turn signals and
right to turn on the right turn signals. To turn them off, position
the switch back in the center.
ACTIVATING THE WALK MODE
When pushing the bike uphill, use the WALK mode. This mode
will turn the motor at walking speed to assist you in moving the
bike.
TO ACTIVATE THE WALK MODE
To activate the WALK mode, push and hold the “assist down”
button. After 2 seconds the motor will begin to turn at
walking speed.
TO STOP USING THE WALK MODE
To stop using the WALK mode, release the “assist down” button.
The motor will stop turning and resume normal operation. Using
either brake lever will also stop the WALK mode.
ACTIVATING THE CRUISE CONTROL FUNCTION
Use the cruise control feature to maintain a desired speed
without using the throttle or pedal assist.
TO ACTIVATE THE CRUISE CONTROL FUNCTION
Use the throttle or pedal assist to reach your desired speed.
Push and hold the “assist down” button for 2 seconds. When the
“C” graphic appears, release the “assist down” button and the
current speed will be maintained without the need to pedal or
use the throttle. In CRUISE mode, the throttle is automatically
modulated so that the desired speed is maintained.
To discontinue the use of the cruise control function, choose
one of the following actions:
OPERATION
