10
Mudguard, lamp then front wheel…
It’s best to fit the lamp and front mudguard before fitting the front wheel.
1.
Pass the lamp cable through
the bracket and attach to
the two spade connectors.
2.
One bolt attaches both the
lamp and the top of the
mudguard.
3.
Firmly tighten the lamp using the screw at the side
Tighten two screws holding the mudguard stays
Front wheels may have an optional quick release (QR)
mechanism.
To insert the QR into the front wheel correctly:
Ensure the QR mechanism is
centred in the recess cup.
1.
Use the nut
to pre-tighten the mechanism
NOT the lever.
2.
Then
push home the lever, as
tightly as possible
.
1
2
