31
Damage to the power cord
Make sure that:
• In case of damage to the power cord in order to avoid danger its replacement must be carried out by a manufacturer,
service department or similarly qualified personnel.
The device is operating, the lighting is switched off
Make sure that:
• The lighting switch is on
• Fluorescent lamp or the starter of the device are not burnt
Equipment does not reach the appropriate temperature, the lighting is on
Make sure that:
• The main switch is turned on
• The temperature setting on the controller is set correctly
• The controller is operating properly
• The condenser is not filthy, and clean it when necessary
• The ambient temperature does not exceed 25º
The showcase is working too loud
Make sure that:
• The device is standing stably and is properly levelled
• Furniture adjoining the device do not vibrate when the compressor is working
• Internal elements have been properly
• If after verifying the items described in this section the equipment does not work properly, you should contact JUKA
technical service, indicating the data from the data plate of the device.
JUKA Technical Service:
phone number: +38 (097) 524 84 11
e-mail:service@juka.ua
