– 100 –
The sewng machne operaton can be changed by changng the settng of the memory swtch.
3-10. start and change of the memory switch
three figures from
the top are memory
switch nos.
Two figures from the
bottom are contents
of setting.
1) When
key s pressed n the state that the
sewng LED s put out, the memory swtch
settng mode s obtaned.
2) Change the memory swtch No. wth
or
key.
3) Adjust the memory swtch No. to the No. you
desre to change, and press
key. The
sewng LED lghts up.
4) Change the contents of the memory swtch
wth
or
key.
5) The value can be returned to the value at the
tme of delvery from the factory wth
key.
6) Press
key to regster the contents of
change. Sewng LED goes off and the mode
returns to the selectve state of the memory
swtch No.
7) Press
key to finalize the memory switch
settng mode and the mode returns to the
normal mode.
1.27 which is indicated when "M"
key is pressed indicates that the
max. speed limitation of the first
memory switch is 2,700 rpm. (state
at the time of delivery from the fac-
tory)
