– 9 –
3-10. raising the machine head
WarnInG :
Tilt/raise the sewing machine head with both hands taking care not to allow your fingers to be
caught in the head.
turn oFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
[When using areas 1306 and 1510]
When rasng the sewng machne, hold nsertng
secton
A
of the machne bed by hand, and quetly
rase t untl bed support rubber
3
comes n contact
wth the table. For the S type, remove chan
2
from
manual pedal
1
first, and perform the work.
1. Be sure to raise the machine head
at the leveled place so as to prevent
the sewing machine from falling.
2. When raising the machine head,
move feeding frame
4
before-
hand to the right-hand side until
it goes no further, and fix it with
tape or the like. When the ma-
chine head is raised in the state
that moving or fixing is insuffi
-
cient, breakage of X-move cover
or X-move rail will be caused.
Besides, feeding frame
4
which
is tilted to the left-hand side by
the self-weight interferes with the
intermediate presser or the like
and breakage of the components
will be caused.
4
2
3
6
5
A
1
6
[When using areas 2206 and 2210]
1) Remove throat plate auxlary cover
6
from the sewng machne.
2) Hold nsertng secton
A
of the ma-
chne bed by hand, and quetly rase
t untl bed support rubber
3
comes
n contact wth the table.
3) After returnng the sewng machne
to ts home poston, refer to
“
!
-3-6.
Installing the throat plate auxilia-
ry cover” p.6
, and nstall the throat
plate auxlary cover.
1. Be sure to raise the machine head at the leveled place so as to prevent the sewing
machine from falling.
2. When raising the sewing machine without removing throat plate auxiliary cover
6
,
the throat plate auxiliary cover interferes with the table, bend or breakage of the
throat plate auxiliary cover, tilt of the sewing machine, etc. will result.
3. When raising the machine head, move feeding frame
4
beforehand to the right-hand
side until it goes no further, and fix it with tape or the like. When the machine head is
raised in the state that moving or fixing is insufficient, breakage of X-move cover or
X-move rail will be caused. Besides, feeding frame
4
which is tilted to the left-hand
side by the self-weight interferes with the intermediate presser or the like and break-
age of the components will be caused.
[areas 2206 and 2210]
