– 77 –
6
clear the counted value.
When clearng the counted value, set the count to the stop
state and press CLEAR button
G
.
* clEar button is displayed in case of the stop state only.
When CLEAR button
G
is pressed, the clear confirma
-
ton screen s dsplayed.
When CLEAR button
H
is pressed in the clear confirma
-
ton screen, the counted value s cleared.
4
start the measurement.
When START button
D
s pressed, measurement of
each data s started.
5
stop the count.
Dsplay the workng measurement screen referrng to 1) and 2)
of
"
@
-2-24.(5) observing the working measurement infor-
mation" p.76
.
STOP swtch
E
s dsplayed when the measurement s
beng performed. When STOP swtch
E
s pressed, the
measurement s stopped.
After the stop, START button
D
s dsplayed at the pos-
ton of STOP button. To contnue measurng, press START
button
D
agan. The measured value s not cleared untl
CLEAR button
F
s pressed.
D
E
F
G
H
