– 109 –
3) Port I/O setup
To make output number setting, input number set-
ting, and virtual I/O number setting, the setup button
(G) is pressed to enter an input of the setting
function number (H) in the selected terminal through
the ten key (I). The signal type is selected from High
(J) and Low (K). In the case of virtual I/O number
setting, it is selected from output and input .
To make switch operation setting, the setup button
(L) is pressed to select the signal type from High
(M) and Low (N).
E
L
J
K
H
I
(2) CP-20
It is possible to make setting with the memory switches (Level 2) No. 300 to 401.
In regard to the method of input entry, refer to 4. Memory Switches, (2) Function list , • Level 2 (Simplified panel).
N
M
B
G
F
