– 131 –
4. Reading/Writing of the adjustment data and all sewing machine data in the smart media (For the CP-20)
(1) When the power is turned on with the key kept pressed, the adjustment data mode is started. When the
adjustment data mode is started, the pattern number LED is lit up.
When the power is turned on with the key kept pressed, the all sewing machine data mode is started. When
the all sewing machine data mode is started, the X scale LED is lit up.
: Adjustment data mode
: All sewing machine data mode
(2) Select data reading or writing with the key
: Reading
: Writing
(3) Select the fine number with the and keys.
1)
For reading
Selection is made possible only for the file number that is registered in the smart media.
to
2)
For writing
Selection is made possible only for the file number that is not registered in the smart media.
to
(4) When the key is pressed, reading or writing of each data block is started. In the middle of data reading or
writing, the file number is displayed in the blinking mode. When Power OFF is displayed, reading or writing has
been completed.
(5) When the power supply is turned on again, normal operation is recovered.