– 132 –
5. Program rewriting (For the CP-20)
(1) When the power is turned on with the key kept pressed, the rewriting mode of the simplified panel program
is started. When the rewriting mode of the simplified panel program is started, the Y scale LED is lit up.
When the power is turned on with the key kept pressed, the rewriting mode of the main program is started.
When the rewriting mode of the main program is started, the max. number of rotation LED is lit up.
When the power is turned on with the key kept pressed, the rewriting mode of the servo program is started.
When the rewriting mode of the servo program is started, the tension LED is lit up.
: Panel program
: Main program
: Servo program
(2) Using the key, select the program file for the panel, which is kept in the smart media. In regard to the file
display, the key can be used for changeover between the RVL display and the model code display.
: RVL display
: Model code display
For RVL display, five digits of R (1 digit), V (2 digits), and L (2 digits) are displayed.
The non-display portion (RVL +
α
) can be displayed with the use of the and keys.
Example) RVL 01-03-02
For model code display, the five continued characters from the head are displayed.
The model code of the non-display portion can be displayed with the use of the and keys.
Example) AMS-210E
(3) When the key is pressed, writing of the simplified panel program is started. When Power OFF is displayed,
writing has been completed.
When the power supply is turned on again, normal operation is recovered.