– 140 –
Check program number
Check program
Contents
Output check
The wiper and air outputs are generated.
Presser, thread cutter motor/
The status of inching operation of the presser and
origin sensor check
thread trimmer motor, operation of origin retrieval, and
he presser origin / presser sensors is displayed.
Needle thread clamp motor/ The status of inching operation of the needle thread
origin sensor check
clamp motor, operation of origin retrieval, and the needle
thread clamp origin and needle thread clamp sensors is
displayed.
Intermediate presser
The status of inching operation of the intermediate
adjustment
presser motor, operation of origin retrieval, and the
intermediate presser origin sensors is displayed.
Software version display
The software versions of the MAIN and SDC boards
are displayed.
6. Press the key to define the check program number.
7. When the key is pressed for each check program, the current check program is completed and the status
of 5. is recovered.
Once the continuous operation mode is started, it cannot be canceled. To complete it, however, it is necessary to
turn the power supply OFF.
