– 184 –
(2) Method of mechanical valve unit connections
1. Remove once two setscrews
, two washers (small)
, two spring washers
and two washers (large)
attached to mechanical valve unit
. Refer to the
figure, and install 2-pedal (PK78) type
into hole A
of mechanical valve unit
.
2. Connect the air tubes
,
which come from the
machine head, to the Y-type joint
,
respectively.
o Air tube
with label of “1A, 2A”
→
Y-type joint
connected with the label of “3”
of mechanical valve unit
o Air tube
with label of “1B, 2B”
→
Y-type joint
connected with the label of “4”
of mechanical valve unit
3. Install the air tube coming from mechanical valve unit
“7” to
A
, and that from “8” to
B
respectively.
Attach two accessory stop plugs and the cords com-
ing from the control box to the connectors CN1, CN2,
respectively.
4. Connect solenoid valve asm.
and the regulator
using long air tube supplied
as accessories.
(Caution) When the cable sage, fix it to the table us-
ing the staple supplied with the machine
as accessories.
A
Stop plug
Stop plug
Connector
CN2
Connector
CN1
A
B
