– 68 –
2. For CP-20:
1. Press the key when the sewing LED is off to
activate the user setting mode (Level 1)of the memory
switch.
Hold down the key for 6 seconds to activate the
service setting mode (Level 2) of the memory switch.
(Caution) A 3-second and a 6-second buzzers
sound when the key is held down. The
3-second buzzer informs users of ac-
tivation of the test mode.
2. Change the memory switch number with the and
keys.
3. Press the key when the memory switch number
to be changed appears. On this occasion, the sew-
ing LED is turned on.
4. Change the contents of the memory switch with the
and keys.
5. The factory settings can be restored with the key.
6. Press the key to register the changes. The
sewing LED is turned off and the screen returns to
the one where the memory switch number is selected.
7. Press the key to end the memory switch setting
mode and to return to the regular mode.
Upper 3 figures indicate a
memory switch number.
Lower 2 figures indicate
setting contents.