– 7 –
ENGLISH
G
SEWING SHAPE NO.
display
Kind and No. of the sewing shape being selected at present is displayed.
There are 5 kinds below of the kinds of sewing shape.
: Data received from PC
: Users' pattern
: Vector format data
: M3 data
: Sewing standard format
* Be sure to use the media that has been formatted with IP-420.
Refer
to
"
@
-2-28. Performing formatting of the media
" in the separate
"Instruction Manual for the AMS-210EN/IP-420
".
H
SEWING SHAPE
SELECTION button
Sewing shape being selected at present is displayed on this button and when the
button is pressed, the sewing shape selection screen is displayed.
/
Refer to
"
@
-2-5. Performing sewing shape selection"
in the separate
"Instruction Manual for the AMS-210EN/IP-420"
.
I
Sewing-shape total No. of
stitches display
The total number of stitches of the entire pattern shapes which are being selected
at present.
J
MAX. SPEED LIMITATION
Maximum speed limitation which is set at present is displayed on this button and
when the button is pressed, the item data change screen is displayed. (It should
be noted, however, that the limited maximum sewing speed is different from the
maximum sewing speed in the pattern.)
/
Refer to
"
@
-2-6. Changing item data"
in the separate
"Instruction Manual
for the AMS-210EN/IP-420"
.
K
X ACTUAL SIZE VALUE
display
Actual size value in X direction of sewing shape being selected at present is
displayed.
When the actual size value input is selected by setting memory switch
,
X actual size value setting button is displayed.
/
Refer to
"
@
-2-6. Changing item data"
in the separate
"Instruction Manual
for the AMS-210EN/IP-420"
.
L
X scale rate display
Scale rate in X direction of sewing shape being selected at present is displayed.
When the scale input is selected by setting memory switch
, the X scale
rate setting button is displayed.
/
Refer to
"
@
-2-6. Changing item data"
in the separate
"Instruction Manual
for the AMS-210EN/IP-420"
.
M
Y ACTUAL SIZE VALUE
display
Actual size value in Y direction of sewing shape being selected at present is
displayed.
When the actual size value input is selected by setting memory switch
,
Y actual size value setting button is displayed.
/
Refer to
"
@
-2-6. Changing item data"
in the separate
"Instruction Manual
for the AMS-210EN/IP-420"
.
N
Y scale rate display
Scale rate in Y direction of sewing shape being selected at present is displayed.
When the scale input is selected by setting memory switch
, the Y scale
rate setting button is displayed.
/
Refer to
"
@
-2-6. Changing item data"
in the separate
"Instruction Manual
for the AMS-210EN/IP-420"
.
The enlargement/reduction of the pattern data created with the PM-3 is performed by in-
creasing/decreasing the pitch.
Button and display
Description
Summary of Contents for AMS-210EN-7450
