– 15 –
ENGLISH
No.
Item
Setting range
Edit unit
Feeding frame control : midway stop time open/close
Operation order of feeding frame by pedal operation
when lifting the feeding frame by the temporary stop
command in the pattern data is set.
0 to 99
1
0 : Solid presser
1 : Solid presser 2-step stroke (Down to bottom with presser switch)
2 : Solid presser 2-step stroke (Down to the start with start switch)
3 : Solid presser 2-step stroke
(Intermediate
/
down to bottom
/
going up with presser SW)
4 to 99 : Solid presser
Pedal SW1 with/without latch
---
---
Without
With
Pedal SW2 with/without latch
---
---
Without
With
Pedal SW3 with/without latch
---
---
Without
With
Pedal SW4 with/without latch
---
---
Without
With
Enlarging/reducing function mode
---
---
Prohibited
Increasing/decreasing
number of stitches
(Pitch is
fi
xed.)
Increasing/decreasing
pitch (Number of
stitches is
fi
xed.)
Jog move function mode
---
---
Prohibited
Parallel move
2nd origin speci
fi
ed later
Retainer compensation motion : selection of motion
---
---
Without motion
With motion
Selection of needle upper dead point at the time of origin
retrieval/return to origin
---
---
Without
With
Temporary stop : thread trimming operation
---
---
Automatic thread
trimming
Manual (Thread trimming by
turning Stop SW ON again)
Summary of Contents for AMS-210EN-7450
