– 63 –
2-22. Changing contents of pattern button
①
Display the data input screen at the time of pattern button
selection.
Only in case of the data input screen (blue) at the time of pat-
tern selection, it is possible to change the contents of pattern.
In case of the sewing screen (green), press READY switch
to display the data input screen at the time of pattern
button selection.
②
Display the pattern button data change screen.
When PATTERN BUTTON DATA CHANGE button
A
is
pressed, the pattern button data change screen is displayed.
When pressing each button of
B
through
H
, the item data input screen is displayed. When the buttons
of
I
and
K
are pressed, Folder Nos. and With/without thread clamp are changed over.
*
B
Scale rate in X direction and
C
Scale rate in Y direction can be changed to the actual size value
input by selection of memory switch
.
* Max. input range and initial value of max. speed limitation
E
are determined with memory switch
.
* The input range of travel amount in X direction
F
and travel amount in Y direction
G
differs accord-
ing to the sewing range.
③
Display the input screen of the item data you desire to
change.
Data that can be changed are 10 items below.
Item
Input range
Initial value
B
Scale rate in X direction
1.0 to 400.0(%)
100.0
C
Scale rate in Y direction
1.0 to 400.0(%)
100.0
D
Intermediate presser
0.0 to 3.5 (mm)
(Max. 0.0 to 7.0 (mm))
Pattern set value
E
Max. speed limitation
200 to 2500 (sti/min)
2500
F
Travel amount in X
direction
–152.0 to +152.0 (mm)
0.0
G
Travel amount in Y
direction
–102.0 to +102.0 (mm)
0.0
H
Sewing shape
-
-
I
Folder No.
1 to 5
-
J
2-step stroke height
Air-driven type : 10 to 300
70
K
Thread clamp
With/without
With70
A
H
I
D
F
B
C
E
G
J
K
